Bosch/Ford Fuel Injector Repair Kit – Pintle, O-Rings, Filters for, 6-Cylinder, Turbo XR6, FPV

Description

Complete Fuel Injector Repair Kit – Bosch EV6 Style (6-Cylinder)

Restore your fuel injectors to peak performance with this comprehensive rebuild kit, tailored for Bosch EV6-style injectors—commonly found in Australian and Japanese vehicles from the 1990s through early 2000s.

Kit Contents:

• 6 × Pintle Caps

• 6 × Upper O-Rings (Black – Fuel Inlet)

• 6 × Lower O-Rings (Brown – Nozzle End)

• 6 × Inlet Filters

• 1 × Printed Installation Instructions

Compatible with injectors used in a wide range of Ford, Holden, Nissan, Subaru, and other models.
Compare your injectors to the product image to confirm fitment.

Ford Compatibility Guide

Optional Services:

We offer professional installation, including ultrasonic cleaning and flow testing, for a minimal extra cost. Ideal for those restoring injectors or chasing lost power and fuel efficiency.

Bulk Orders & Custom Kits:

Need more than one kit? Want just o-rings, filters, or pintle caps?
Ask us about bulk pricing—we offer excellent value over parts store rates.

Quick Installation Tips:

• Handle injectors with care. Avoid dropping or damaging the pintle end.

• Remove old o-rings with a pick. Roll on new ones by hand.

• Black o-rings on top, brown on bottom.

• Standard lower stack: Pintle cap → o-ring → yellow spacer.

• To replace filters:

  • Use a small screw and vise to extract old filters.

  • Tap new filters in gently with a small hammer—never force them against a hard surface.

• Remove pintle caps with side cutters or utility knife—work slowly to protect the injector tip.

• Seat new pintle caps using a 10mm socket, after spacer and o-ring are in place.

Bring your injectors back to life—and back to factory spec.
Have questions or need help choosing the right kit? Message us anytime.